Slip on Weld Flange

Home » Products » Steel Flange » Slip on Weld Flange
Slip on Weld Flange

Size: 3/8"~80" (DN10~DN2000 )

Pressure
American System: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500
European System: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400

Seal Face
American System: Full Face (FF), Raised Face (RF), Tongue Face (T), Groove Face (G), Female Face (F), Male Face (M), Ring Joint Face (RJ)
European System: Full Face (FF), Raised Face (RF), Tongue Face (T), Groove Face (G), Female Face (F), Male Face (M), Ring Joint Face (RJ)

Materials
Carbon steel: A105
Alloy steel: A182 F 1-F 2-F 5-F 9-F 10-F 91-F 92-F 122-F 911-F 11-F 12-F 21-F 22
Stainless steel: A182 304-304H-304L-304N-304LN 316-316H-316L-316N-316LN 321-321H 347-347H
Low temperature steel: A522 A707 Grade L 1-L 2-L 3-L 4-L 5-L 6-L 7-L 8
High performance steel: A694 F 42-F 46-F 48-F 50-F 52-F 56-F 60-F 65-F 70

Standards
GB/T9112-2000
GB/T9113.1-2000 GB/T9113.2-2000 GB/T9113.3-2000 GB/T9113.4-2000
GB/T9124-2000
GB/T13402-1992
HG/T20592-2009 HG/T20614-2009
HG/T20615-2009 HG/T20623-2009 HG/T20635-2009
ASME B16.5-2009 ASME B16.47-2006
API605-1988
MSS SP 44-2006
CSA Z245.12-05-2005
EN1092-1-2007 EN1759-1-2004
BS1560-3.1-1989 BS4504-3.1-1989
AFNOR NF E29-200-1-2007
ISO7005-1-1992
AS2129-2000
JIS B2220-2004

High pressure slip on flange connects equipment or pipes by fillet weld. And in terms of its pressure and seal face, it adopts both European and American system. It is made of carbon steel, alloy steel, stainless steel, low temperature steel and high performance steel. This flange comes with single-side welding and double-side nut connection. After processing by high-precision of numerically controlled lathe, flange attains good surface treatment to forge pipe fittings.

As a China-based high pressure slip on flange supplier, Baocheng provides a wide range of products that includes weld neck flange, blind flange, petroleum seamless steel pipe, steel pipe tee, and more.

Feedback Form
Other Products
  • Weld Neck FlangeOur weld neck flange, as a kind of industrial steel flanges, comes with the feature of hard to distortion and good sealing. It is applicable for pipelines with high pressure and high or low temperature, or tubes where pressure and temperature fluctuate greatly. Also it is used in transporting expensive, inflammable and explosive.
  • Blind FlangeOur blind flange, with a long service life and reasonable structural design, is made of carbon steel, alloy steel and stainless steel, .etc. In terms of isolation and blockade, it has the same function with head and cap. Due to its good sealing, blind flange can be widely applicable to isolate system. Also, it can be used for blocking pipes' ends and it is convenient to clean garbage while troubleshooting.